Cooling thermostat
KT 18-42
Fryka cooling thermostats are not only suitable for cooling tasks directly in the bath tank with internal circulation, but also for cooling externally connected applications. The cooling thermostats can be regulated via the easy-to-use control and an internally installed temperature sensor. If necessary, the control can be switched to an external sensor that records the temperature in the bath tank and thus enables direct control according to the relevant temperature.
- -40°C to +20°C
- 18l
- with temperature control
- with pump
Characteristics
- Environmentally friendly and energy-saving thanks to natural refrigerants
- Refrigeration unit: low noise, hermetically sealed, air-cooled, low maintenance
- Electronic temperature control with easy-to-read LED display
- No electronic control over the bath which is exposed to the vapours
- Casing parts and bath tank made of high quality stainless steel
- Drain valve allows liquid to be easily drained from the bath
- Housing protection rings at the top and bottom of the device
- Four mounting bolts (internal thread M8) on the corners of the bath for attaching support rods
- Including an external temperature sensor for measuring the temperature in the bath tank
- Removable bath cover and circulation pump
- Easy to clean: Interior free of fixtures, rounded corners
- Frame heating prevents condensation in the edge area
Technical data
| Model | KT 18-42 |
| Operation | -40°C to +20°C |
| Bath volume | 18 l |
| Bath dimensions [WxDxH] | 30 x 33 x 20 cm |
| External dimensions [WxDxH] | 49 x 52 x 66,5 cm |
| Electrical connection | 230 V / 50 Hz |
| Max. current | 3,0 A |
| Weight | 40 kg |
| Circulation | Pump |
| Flow rate | 5 l/min |
| Flow pressure | 0,15 bar |
| Hose connections | 12 mm |